How it Works：
After setting of coating weight and coating width, PLC will command metering pump properly according to synchronous line speed. The quantified oil enters the nozzle through the metering pump for atomization and charging to form charged oil particles in micrometers; at the same time, big charged oil particles will be screened in the atomization chamber, then the charged oil mist particles are evenly adsorbed on the surface of moving strip by electrostatic force when the air flow with charged oil mist goes into adsorption chamber .
1. The nozzle is located in a semi-closed atomizing chamber which is free of blockage problem
or coating skips by harsh environment.Never oil trickling in the shutdown state.
2. State-of- the-art Nozzles-atomizer & electrostatic adsorption techniques make oil distribution even
and minimum 20 mg/sqm/side oil coating possible.
3. Double couple electrodes with discharge point make electrostatic force more intensive, avoiding oil mist spilling.
4. Coating width is adjustable, Preventing blocking of nozzles induced by frequent waste oil circulation and
avoiding oil deterioration.
5. Coatings are applied using non-contact techniques. Uniformity is not dependent upon strip irregularities.
6. Easy-operating on local touch screen or remote central terminal control enables extremely simple operation.
7. Core components and parts are imported with the original packaging; ensuring product performance reliability
and prolonging service life.
8. Almost achieving less routine manual maintenance and maintenance cost.
Scan
