BP plate is the base mateial of electrolytic tinning plate.Which DOS oil or RP oil thin film to be coated for anti-rust. The oil will be removed before next process. In this application,the coating weight required:50-150mg/m2, coating speed：30-450mpm, Coating width ：1250mm

Thin film coating weight required. because the oil should be removed before next process. the coating weight from 300-800mg/sqm

CWR electrostatic oiler was designed to lubricant the welding wire with AL 503 coating material. CWR Electrostatic oiler provides a layer of lubricant over the surface of the wire. The resulting wire has an improved appearance, will not clog the automatic welding apparatus, and the lubricant will not contribute adversely to weld porosity in use. Al-503 welding lubricant won't increase the smoke amount during welding process.

Both of RP oil and DOS oil need to be coated on the surface of BP for next process. DOS oil coating weight required 30-150mg/sqm per side while RP oil coating weight requird 300-1000mg/sqm. INF model is combinated lub-type and RPS-type in one set independently. The choice selected on HMI without any manual cleaning working.